TRACK MOUNTED CRUSHING & SCREENING EQUIPMENT

  • FT4250CC TRACK MOUNTED IMPACTOR
    • ENGINE – CAT C13 440 HP, Tier IV, 1800 RPM
    • CONTROL SYSTEM – radio remote / tether
    • IMPACTOR – 4250 horizontal shaft with heavy-duty solid rotor assembly, 3 reversible and replaceable blow bars, fully lined primary and
      secondary aprons, hydraulic adjustment of aprons and hydraulic actuated access door. (NOTE: Lower apron will be set at 1 1/2” and the
      upper apron will be set at 3” unless otherwise noted.)
    • TRACK UNDERCARRIAGE – track width 600 mm (23.6”)
    • FEEDER – 50” x 15’, grizzly fingers 1½” spacing, loading hopper with fixed walls and by-pass chute with flop gate and AR liner
    • END DELIVERY CONVEYOR – 1200 mm (approx. 48”) x 40’ hydraulic drive conveyor with 360 PIW, 1 ply endless belt; easily removable for maintenance
    • VIBRATOR SCREEN – 6’ x 12’ double deck – 2 bearing with mounting, hydraulic drive, less square screen cloth
    • UNDER SCREEN CONVEYOR – 60” with belt and drive
    • CROSS OVERS CONVEYOR – 24” with belt and drive forward and reversing capable
    • RETURN CONVEYOR – 18” with belt and drive (fold for travel)
    • DUST SUPPRESSION SYSTEM with manifold for customer water source
    • HYDRAULICS – includes hydrostatic pump group and circuit, one (1) 12 GPM auxiliary circuit for side delivery conveyor (less side delivery conveyor), one (1) 20 GPM auxiliary circuit, and hydraulics for magnet (less magnet)
    • PAINT – Two part urethane primer, two part urethane topcoat – Factory standard color(s).
kpi-jci track mounted equipment 4250

SUBJECT TO AVAILABILITY –
CALL FOR PRICING

  • FT2650 TRACK MOUNTED PIONEER JAW CRUSHER
    • ENGINE – CAT C9.3 300 HP, Tier IV, 1800 RPM
    • CONTROL SYSTEM – radio remote/tether
    • PIONEER JAW CRUSHER – 2650 automatic hydraulic dual wedge adjust CSS, hydraulic drive for crusher, full belly jaw dies and remote grease lube (NOTE: Set jaw crusher close side setting at 4” peak to peak unless otherwise noted.)
    • TRACK UNDERCARRIAGE – track width 500 mm (19.7”)
    • FEEDER – 50” x 18’, 5’ step deck grizzly bars 2½” spacing, loading hopper with fixed walls and three way by-pass chute
    • END DELIVERY CONVEYOR – 1200 mm (approx. 48”) x 40’ hydraulic drive, 360 PIW 4 ply endless belt, conveyor is easily removable for
      maintenance
    • HYDRAULICS – includes hydrostatic pump group and circuit, one (1) 12 GPM auxiliary circuit for side delivery conveyor (less side delivery conveyor), one (1) 20 GPM auxiliary circuit, and hydraulics for magnet (less magnet)
    • PAINT – Two part urethane primer, two part urethane topcoat – Factory standard color(s).
kpi-jci track mounted equipment 2650

SUBJECT TO AVAILABILITY –
CALL FOR PRICING